Alright, so I lied in the last post. It didn't work well at all. The software had a memory leak and crashed often. The software was incredibly slow. The AMD Geode PC overheats trying to run XP, and is also UNBEARABLY slow. The wireless network signal was weak, and it didn't have any kind of feedback to tell me the garage door was open or closed. It just sucked.
So I started over:
The same Velleman K8055 USB Interface board.
Used a better mini PC this time. A P4 based box with 768MB of ram. (At least it has SOME grunt)
A high power wireless bridge for network connectivity (good signal now).
An Axis IP webcam to keep an eye on things.
It has magnetic reed switches on the door connected to the K8055 digital inputs to detect when it is opened or closed.
All sitting pretty on a little shelf near the ceiling.
I wrote all new software from scratch. A web based PHP front end running on my webserver. The PHP script communicates directly with the VB program running on the PC, and gives realtime status and control of the door, webcam view, and the VB software even sends me SMS messages when the door is open, closed, or jammed!
Its pretty slick now! Commands are nearly instant, and I can see the status of the door from anywhere.
Need to add security before I can show off the front end to you guys...
Soo uh... There is a PC connected to my garage door. Is that wrong?
I saw this piece on hackaday today, and thought I'd give it a shot with a different method. I actually managed to complete it in 3 hours!
Its a Presidian PIC-1MM Personal Internet Communicator I picked up at the DI for $5. Its basically a tiny low power AMD Geode powered PC running Windows CE. I hacked the BIOS on it a while back and installed Windows XP (requires a BIOS hack to run a custom OS). It currently has a Cisco AE1000 wireless dongle for network connectivity. All running fine from a 12v 1.5amp brick.
This is a Velleman K8055 USB Interface board. It allows you to control numerous inputs and outputs via USB digitally, or analog. I built it a while back for an abandoned project, and had no use for it. The relay connected to the side is what activates the garage door opener "button". The capacitor/resistor combo just above it allows the relay to click momentarily, even if the output is constant. We don't want to hold the garage door button down.
This is a K8055 "Bridge" that runs in windows, and allows any iOS device to control the K8055 from anywhere. There is a $3 app in the iTunes store to install on the phone. Its secured with a "key" to prevent other phones from connecting.
...and thats it! It works great! I will probably eventually write my own software, as the K8055 Bridge software is clunky.